Table 3.13 16Sli2/16Mwsli Board Ports - Samsung OfficeServ 7200 Technical Manual

Table of Contents
Home Page
OfficeServ 7200 INSTALLATION
TECHNICAL MANUAL PART 3 MAY 2010
3.3.10 16SLI2/16MWSLI
These boards provide 16 ports for connecting analog stations. It can go into slots 1 through 5 in
either cabinet. Add as many as needed. These cards automatically detect DTMF or dial pulse
signals from the SLT. These cards have no DTMF receiver. They will share the system resources.
If there is a high concentration of SLI cards, and MFM daughter board must be added to relieve
congestion. MFM can be added to the MCP/MP20.
FRONT VIEW OF 16SLI2/16MWSLI
The front view of the 16SLI2 and 16MWSLI boards are shown in the pictures below.
Figure 3.29 Front View of the 16SLI2
Figure 3.30 Front View of the 16MWSLI
Front panel components of the 16SLI2/16MWSLI:

Table 3.13 16SLI2/16MWSLI Board Ports

Ports & LEDs Function Description
P1~P16 Analog Extension Ports
• The 16MWSLI supports Message Waiting Lamp functionality for analog stations that have
this capability.
• Port 1 supports Power Failure Transfer function
(Refer to Section 3.4).
3.29