Samsung OfficeServ 7400 Technical Manual page 104

OfficeServ 7400
TECHNICAL MANUAL
Use screw holes 1 and 3 to attach to a standard telephone wall-mount plate with
locking pins. This method can cause the keyset to wobble as the keyset feet do not fit
securely to the mounting surface.
WALL-MOUNTING DS, ITP-5121D and ITP-5107S KEYSETS
DS, ITP 5121D and ITP 5107S keysets come equipped with a reversible base stand. To
wall-mount a keyset, remove the base stand, reverse it, and attach stand in the bottom
slots of the keyset. Use screw holes 1 and 2 to attach the keysets to the wall
Figure 7.23).
To secure the handset once you wall-mounted your keyset you must remove the
handset retaining clip reverse it such that the extended clip is facing the top of the
phone (see Figure 7.23).
OR
1
2
3
Figure 7.22 Wall-Mounting an iDCS Keyset
7.16
Table of Contents
Home Page
INSTALLATION
PART 7 JUNE 2006
(see