Samsung OfficeServ 7400 Technical Manual page 26

OfficeServ 7400
TECHNICAL MANUAL
Ports & LEDs
LAN LED
SM LED
MDM LED
3.2.5 LP40 LEDs
The front view of the LP40 board is shown in the picture below.
The components on the front panel of the LP40 have the functions below:
Port, LED
LINK1~LINK3
MISC1~MISC2
Status of LAN operation
- Off: No-power and no-connection of LAN port
- On: The color of the LED shows the LAN transmission speed and
connection speed.
• On(Green): Good connection + Operation at 100 Mbps
- Blink (Green): Good connection + Operation at 10 Mbps.
SmartMedia Access Status
- Off: No-SmartMedia
- On: The color of the LED shows the mounting status and the normal
operation status after access.
• On(Green): Mounted + Normal Operation
• On(Red): Non-mounted or Mounted + Abnormal Operation
- Blink (Green): SmartMedia is mounted and in access mode.
MODEM Daughter card status
- Off: No-MODEM
- On(Green): MODEM mounted
- Blink (Green): On transmitting data
Figure 3.11 Front View of the LP40
Table 3.4 Ports and LEDs of the LP40
Ports for connecting MP40 with LP40
Ports for connecting external music, paging, loud bell, common bell and door
bell when MIS daughter board is installed
3.11
Home Page
Function Description
Function Description
Table of Contents
INSTALLATION
PART 3 JUNE 2006