Samsung OfficeServ 7400 Technical Manual page 108

OfficeServ 7400
TECHNICAL MANUAL
7B/SINGLE LINE ULTRA BASE WEDGE
Figure 7.26 Attaching 7B/Single Line to AOM and 7B/Single Line to 64 BM
ATTACHING iDCS 14 BUTTON MODULES TO AN iDCS KEYSET
To add an iDCS 14 Button Key Strip to your iDCS keyset follow these steps
7.27).
1) Place the keyset face down on a flat surface.
2) Remove the base pedestal by placing your thumbs over the attachment clips and
press outward while simultaneously pressing down on the keyset body with your
fingertips.
3) Remove the ribbon cable knockout from the bottom of the keyset.
4) Clip the 14 button strip to the side of the keyset.
5) Plug one end of the ribbon cable into the keyset and the other end into the 14
button strip.
7B / SINGLE LINE ULTRA BASE WEDGE
METAL CONNECTOR CLIP
METAL CONNECTOR CLIP
7.20
Home Page
PART 7 JUNE 2006
AOM ULTRA BASE WEDGE
64BM ULTRA BASE WEDGE
Table of Contents
INSTALLATION
(see Figure