Table of Contents
Advertisement
er i e art
SERVICE ITEM
Hydraulic oil
General grease points Multi-Purpose Grease
Steering pivot points
Spray pump
Remote greasing
system
Rapidfire oiler
• Ensure that lubricants are stored in a place where
the lubricants are protected from contamination
(such as dirt and moisture). Always use clean
containers when handling lubricants.
• Do not mix lubricants. Proper lubrication may be
affected by differences in chemical composition.
• Seek advice from your petroleum dealer on the
correct use of lubricants and additives.
• At the time of manufacture, G15 anti-corrosion
spray is applied to all fasteners (bolts, washers and
nuts) and zinc plated components.
110 - Chapter 10 - Lubrication & Maintenance
ri ant
SERVICE SPECIFICATION
Components are prefilled with
Universal Tractor trans, 10 W 30
hydraulic oil.
Molybdenum Based Grease
SAE 15W40
EP0
Air Tool Oil
CAPACITY (L)
Consult your tractor
operator's manual.
-
-
2.68L for Zeta 260
-
50ml
• G15 should also be applied to the sprayer both
pre and post season.
• As a guide, application to following areas are
recommended but not limited to; Pump mounting
bolts, boom rests, left hand pod, mudguard
mounting bolts, induction hopper bolts & latches,
hydraulic manifold, boom hinge bolts, airbag hose
fittings and hydraulic hose crimp fittings etc.
Prairie Pro Operator's Manual MY19 - REV 2
PART NO.
-
-
-
GA5012457 (20L)
-
GA5053550 (1L)
GA5054345 (5L)
Advertisement
Table of Contents
