Spray Calibration; Maintenance - Goldacres Prairie Pro Operator's Manual

reparin
O er ea
Check any areas to be sprayed for overhead power
lines. If there are any in the area, contact the relevant
energy provider for information on safe use of
machinery near live lines.
pra ali ration
Flow meter and spray nozzle calibration should be
checked regularly to ensure that correct application
rates are maintained. Refer to Chapter 6 'Calibration'
for procedures to check and alter calibration if
required.
Maintenan e
Correct servicing and maintenance of the Sprayer
will ensure the most efficient and safe operation
possible. Servicing and maintenance should be
carried out according to the schedule in Chapter 10
'Lubrication & Maintenance'.
rin e Fir t
Operation
Torque Settings
• Check the torque on retaining nuts frequently.
• The wheel nuts should be checked to ensure that
320 ft/lb is maintained.
ri ation
• Maintain correct oil levels in the diapragm style
pump.
• Inspect hydraulic lines and connections for leaks.
Tank Retaining Strap Bolts
• The tank retaining strap bolts should be checked
to ensure that they have not become loose.
p Mo ntin
• The pump mounting bolts should be checked to
ensure that they are not loose.
i t
• Check each light around the machine for correct
operation.
- Chapter 7 - Pre-Operation
pra er For
ower ine
o r O
e
ra li Fl i
olt
e
DANGER: Check area to be sprayed for over head
power lines. Contact between the machine and
power lines can result in serious injury or death.
If there are power lines in the spray area, exercise
extreme caution when tilting boom wings.
DANGER: Do NOT walk on machine platform
when near power lines.
Prairie Pro Operator's Manual MY19 - REV 2