Table of Contents
Advertisement
oo
BREAKAWAY END
THIRD STAGE
Pivot C
SECOND STAGE
Pivot B
FIRST STAGE
Pivot A
PARALIFT
Pivot A
Above: Top view of boom & tilt angle adjustment.
Prairie Pro Operator's Manual MY19 - REV 2
t ent
30 mm
Pivot D
30 mm
li n ent
The boom is divided up into three stages and a
breakaway end. These stages need to have their
alignment angles adjusted at each pivot area except
for the first stage.
BEFORE YOU BEGIN
• Park the machine on a flat level surface, engage
the parking brake and chock the sprayer wheels.
• Start with the boom in the working (unfolded)
position.
NOTE: It is important that both wings are adjusted
the same. If one wing is adjusted further forward or
back than the other, the boom may not sit level.
TILT ANGLE ALIGNMENT PROCEDURE:
FIRST STAGE
• The first stage tilt angle is hydraulically controlled
by the operator and does not re uire specific
pre-alignment.
30 mm
ilt
Continued over page
Chapter 9 - Boom -
Advertisement
Table of Contents
