Goldacres Prairie Pro Operator's Manual page 150

Fill Flow Meter
Flow Meter Operation
1. Press 'PRO' to switch display screen on
2. To begin measuring flow into the sprayer tank, ensure '>L' next to the target volume is flashing. You can now
apply flow through the fill system. The actual volume on the bottom line should begin increasing.
Note: If '>L' is not flashing when the TeeJet electric ball valve is fitted, the 'Actual' volume will not count
3. Once the target volume has been reached, an alarm will activate. Stop water flow and press 'CLR' to silence
the alarm.
4. To reset the actual volume, press and hold 'CLR'
5. If at any stage the target volume becomes incorrect, press 'CLR' once. This will reset the target volume to the
maximum value you programmed in when setting up the console.
6. When the operation is complete, press the up and down arrows simultaneously to turn the console off.
144 - Chapter 12 - Optional Accessories
erie
Prairie Pro Operator's Manual MY19 - REV 2