Selecting Lamp Switching Mode - Christie LW502 User Manual

3.4 Selecting lamp switching mode

The following setting is necessary only when ALTERNATE is selected in the
LAMP MODE dialog. ( 19 ) Select the AUTO or NORMAL lamp switching mode
when using ALTERNATE.
1.
Highlight ALTERNATE MODE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the ALTERNATE MODE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight AUTO or NORMAL.
AUTO: Turns on the projector with the least lamp usage.
NORMAL: Turns on the projector that was not used the previous time.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. ( 24 )
• The ALTERNATE MODE dialog can be operated on the Main projector
NOTE
when ALTERNATE is selected in the LAMP MODE dialog.
• To maintain the quality and reliability of the two projectors, the projector with
the most lamp usage may be turned on even if AUTO is selected.
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
STACK menu settings
21