2. Installation
For safety reasons, read
before installation. In addition, take note of the following for proper use of Instant
Stack.
● Use the same model projectors.
● To avoid incorrect operations with the remote control, it is recommended to
operate with the control panel or a wired remote control if you control one
projector with the remote control during installation. KEY LOCK or REMOTE ID *
function is also available.
● Images from Set A and Set B may superimpose well but the image positions
can shift over time. Readjust to superimpose the images.
* Available only in optional remote control.
2.1 Preparing for Intellectual Stack
When using Intellectual Stack using RS-232C connection, ensure the following
settings are set on the two projectors. Otherwise, the Intellectual Stack menu can-
not be operated.
● STANDBY MODE in SETUP menu: NORMAL
(Operating Guide
● COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide
● STACK LOCK in SECURITY menu: OFF
When STACK LOCK is set to ON, menus related to Instant Stack cannot be
operated. You must set it to off during installation and menu setting.
(1) Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > SECURITY (> ENTER PASSWORD) > STACK LOCK
STACK LOCK dialog appears on screen.
→
Guide
SECURITY
(2) Use the ▲/▼ buttons to highlight OFF, and press the ►
button to complete the setting.
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
1.1 Basic information and preparations
(Operating Guide
→
SETUP
menu)
→
OPTION
menu)
menu)
→
OPTION
menu)
(Operating
( 3, 4 ) carefully
6