Christie LW502 User Manual page 39

6. Restrictions on Schedule function
 *1): This Schedule can be input to Projector Web Control even if the projectors
are operating in Intellectual Stack. If the input port to be changed according to the
Schedule function can be used in Intellectual Stack, the Schedule is executed.
If not, it is not executed.
X *2): This Schedule can be input to Projector Web Control when the projectors
are operating in Intellectual Stack but it is not executed.
X *3): This Schedule can neither be input to Projector Web Control nor be executed
when the projectors are operating in Intellectual Stack.
• If the Schedule is not executed, an error message is sent in accordance
NOTE
with the conditions set in Schedule Execution Error on Projector Web Control.
(Network Guide
• If the Schedule function is set to turn off the power when the projectors are
operating in Intellectual Stack, both the Main and Sub projectors are turned off.
• If the Schedule function on the Main projector is set to turn on the power, the
projectors are turned on according to the LAMP MODE setting.
• When the two projectors are operating in the DUAL mode and a menu is being
displayed on one of the projectors, the Schedule function for My Image and
Messenger on the other projector is not executed.
• Power Off in the table refers to turning off the power and entering the standby
mode according to the Intellectual Stack settings or by pressing the STANDBY/
ON button on the remote control or control panel of the Main projector.
• The projectors cannot be turned on by the Schedule function on the Sub
projector. Set it on the Main projector if necessary.
• When the Sub projector is turned off according to the ALTERNATE MODE
setting, the Schedule function on the Sub projector to turn off its power is
executed without error. Turn off only the Sub projector.
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
(continued)
→
3.1.6 Alert Settings)
Restrictions on Schedule function
37