Christie LW502 User Manual page 14

Installation
2.3 Installing the second projector (Set B) - Setting up Set B
3.
Adjust the image size and position of Set B with the ZOOM ring, VERTICAL
adjuster, HORIZONTAL adjuster and FOCUS ring such that the image can be
superimposed to the image of Set A.
• Fine adjustment of the image size and position afterwards with
NOTE
functions such as KEYSTONE and 3D KEYSTONE does not increase the
image size. You must have the image of Set B completely overlapping the
image of Set A.
• When controlling Set B with the remote control, Set A may also respond to
the remote control. It is recommended to control Set B with the control panel
on Set B.
• If using Simple Stack, it is recommended to disable the remote control
receiving on Set B using KEY LOCK or REMOTE ID * and operate using
the control panel or a wired remote control as Set A responds to the remote
control.
(Operating Guide
• If using Simple Stack, go to For Simple Stack users. ( 16 )
* Available only in optional remote control.
4.
Display the menu with the MENU button.
menu function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu appears on screen.
(Operating Guide
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display the
STACK MODE dialog.
Highlight MAIN with the ▲/▼ buttons, and
press the ◄ button to return to the previous menu.
(continued on next page)
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
→
OPTION menu)
→
OPTION menu)
(continued)
(Operating Guide →
Using the
12