Christie LW502 User Manual page 15

2.3 Installing the second projector (Set B) - Setting up Set B
7.
Use the ▲/▼ buttons to highlight LAMP
MODE, and press the ► button to display
the LAMP MODE dialog.
Highlight DUAL with the ▲/▼ buttons, and
press the ► button.
8.
After pressing the ► button, a dialog to
confirm whether or not to save the setting is
displayed.
Press the ► button to complete the setting.
( 24 )
NOTE • If STACK MODE is changed to MAIN or SUB, the setting of OPTION
menu - SERVICE - CONTROL TERMINAL - RS-232C is forcibly set to CONTROL.
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
(continued)
Installation
13