Selecting The Light Source Switching Mode - Christie LWU900-DS User Manual

3.4 Selecting the light source switching mode

The following setting is necessary only when ALTERNATE is selected in the
LIGHT MODE dialog. ( 15 ) Select the AUTO or NORMAL light source switching
mode when using ALTERNATE.
1.
Highlight ALTERNATE MODE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the ALTERNATE MODE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight AUTO or NORMAL.
AUTO: Turns on the projector with the least light source usage.
NORMAL: Turns on the projector that was not used the previous time.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. ( 20 )
• The ALTERNATE MODE dialog can be operated on the Main projector
NOTE
when ALTERNATE is selected in the LIGHT MODE dialog.
• To maintain the quality and reliability of the two projectors, the projector with
the most light source usage may be turned on even if AUTO is selected.
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
17
STACK menu settings
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG