Christie LW502 User Manual page 25

3.5 Selecting input source for Sub
• If FIXED (HDMI 1) is selected, the HDMI 1 port can be selected as an
NOTE
input source on the Main projector. When any button to select an input port on
the remote control or the INPUT button on the projector is pressed, the MAIN
INPUT SOURCE dialog is displayed on screen.
• If FIXED (HDMI 1) is selected, the HDMI 1 port on the Sub projector should
be connected to the HDMI OUT port on the Main projector with a HDMI cable.
The image from the selected port is output from the HDMI OUT port on the Main
projector to the HDMI 1 port on the Sub projector.
• If FIXED (HDMI 1) is selected, HDMI 1 or HDBaseT port can be selected as
an input source on the Main and Sub projectors.
• If FIXED (HDMI 1) is selected, the HDMI OUTPUT setting is invalid.
• If FIXED (HDMI 1) is selected, the HDMI OUT and AUDIO OUT settings of
STANDBY OUTPUT are invalid.
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
(continued)
STACK menu settings
23