1.1 Basic information and preparations
WARNING ►Take a special care not to fall the stacked projectors.
• When stacking two projectors, make sure the elevator feet and heel of the
upper projector are inserted into the corresponding pockets of the lower
projectors. (10)
• When using the Instant Stack function by piling up two projectors, you can
change the projection angle by adjusting the
elevator feet of the unit that is placed underneath.
(7) Exercise care to prevent the stacked projector
from falling off or tipping over while adjusting the
elevator feet.
• A maximum of two projectors can be stacked. Do
not stack three or more projectors.
• Do not install the projectors that are stacked using
the stack pockets, elevator feet and heel of this
projector at a place higher than a person's height.
• Do not install the projectors that are stacked using
the stack pockets, elevator feet and heel of this
projector on a ceiling.
• Do not touch the stacked projectors except when
instructions are given in this manual. Do not hit the
projectors with any type of object.
CAUTION ► Place the projector in a cool place with sufficient ventilation.
Keep a space of 50 cm or more between a side of the projector and other
objects such as a wall. Take care not to let the hot exhaust air from other
projectors enter the intake vents of the projector.
(continued on next page)
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
(continued)
Elevator feet
Lens
adjuster door
Stack pocket
Heel
4