Restrictions On Schedule Function - Christie LW502 User Manual

6. Restrictions on Schedule function

This model supports the Schedule function on the Projector Web Control feature.
(Network Guide
functions when Intellectual Stack with RS-232C connection is used. But for Simple
Stack without an RS-232C connection, there is no restriction on the functions.
Regardless of whether Intellectual Stack or Simple Stack is used, take note of the
Schedule settings before using the Stack function. Unexpected setting changes
may occur when using the Stack function.
Refer to the following for the restrictions concerning Intellectual Stack. If using
Simple Stack, skip this chapter.
Restrictions on the Main projector
Functions
Power
status
Power On
Power Off
Input port change
My Image
Messenger
Blank
Eco Mode
Restrictions on the Sub projector
Functions
Power
status
Power On
Power Off
Input port change
My Image
Messenger
Blank
Eco Mode
 : This Schedule can be input to Projector Web Control and be executed even if
the projectors are operating in Intellectual Stack.
(continued on next page)
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
→
3.1.7 Schedule
Main
Sub
Main
Sub
Settings) There are some restrictions on the
LAMP MODE
DUAL ALTERNATE
ON ON
ON OFF
 
 
 *1)  *1)
 
 
 
 
LAMP MODE
DUAL ALTERNATE
ON ON
ON OFF
X *3 X *3
 
 *1)  *1)
X *2)

X *2)

X *3)

 
DUAL/
ALTERNATE
OFF OFF
ON OFF
 
 
 *1)  *1)
X *2) X *2)
X *2) X *2)
X *3) X *3)
 
DUAL/
ALTERNATE
OFF OFF
ON OFF
X *3 X *3
 
 *1)  *1)
X *2)

X *2)

X *3)

 
36