Selecting Lamp Switching Mode - Christie LX41 User Manual

3.4 Selecting lamp switching mode

The following setting is necessary only when ALTERNATE is selected in the
dialog. ( 19 ) Select
LAMP MODE
when using ALTERNATE.
1.
Highlight ALTERNATE MODE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the ALTERNATE MODE
2.
Use the ▲/▼ buttons in the dialog to highlight AUTO or NORMAL.
AUTO: Turns on the projector with the least lamp usage.
NORMAL: Turns on the
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. ( 23 )
NOTE • The ALTERNATE MODE dialog can be operated on the Main
projector when ALTERNATE is selected in the LAMP MODE dialog.
• To maintain the quality and reliability of the two projectors, the projector with
the most lamp usage may be turned on even if AUTO is
LX41/LW41 User Manual - Instant Stack Guide
the AUTO or NORMAL lamp switching mode
projector that was not used the previous time.
21
STACK menu settings
dialog.
selected.
020-000509-01 Rev.1 (06-2012)