Inputting An Image To Sub And Main Individually - Christie LW502 User Manual

Connecting cables
4.2 Connecting signal cables
Using HDMI OUT port
1.
Connect the HDMI OUT port on Main to
the HDMI 1 port on Sub with a HDMI cable.
2.
Connect the image output device to HDMI 1
or HDBaseT ports on Main.

Inputting an image to Sub and Main individually

1.
Split the output signal from your image device into two with device such as a
signal splitter.
2.
Connect the output ports of the image output device to the same input ports
on the Main and Sub projectors.
NOTES for Intellectual Stack • LAN cannot be used as the input port on
the Main projector in Intellectual Stack.
NOTES for Simple Stack • Any ports compatible with the signal can be
used. Input the same signal to the two projectors individually.
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
(continued)
HDBaseT
HDBaseT:
LW502/LWU502
only
Main
HDBaseT:
LW502/LWU502
only
Sub
Connection example
in Intellectual Stack
30