Installation
2.4 Confirming Main and Sub settings
1.
Press the MENU button on the remote control for Main (Set B).
NOTE • When Intellectual Stack is in use, only Main can receive the remote
control signals. Sub does not respond to the remote control signals.
2.
The following dialogs appear on the lower right screen.
3.
If you press the ► button, the dialog closes and the Main (Set B) menu
appears when MAIN is highlighted.
If you press the ◄ button, the dialog closes and the menu disappears.
NOTE • If these dialogs are not displayed on screen, check the RS-232C
connection ( 11 ) and the MAIN or SUB setting in the STACK MODE dialog.
( 18 )
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
Main (Set B)
Sub (Set A)
14