Initializing the EO measurement
Keysight N4373D Lightwave Component Analyzer, User's Guide
1 Press
.
2 Select the "EO Measurement" tab.
3 If necessary, select the a Differential or Single-Ended
Measure Mode, depending on the type of your DUT.
4 Select or enter the wavelength at which you are testing.
5 Select the optical input you are using.
6 If you have optical components, such as attenuators, fiber
optic cables or splitters, between your device under test and
the optical input, open and enable Optical Path
Deembedding.
Here you can enter the parameters for the optical path
directly.
Making Measurements
97