Table of Contents
Advertisement
Introduction
Initial safety information
12
The laser source used in the Lightwave Component Analyzer is
classified as Class 1M according to IEC 60825-1/2007.
All laser sources comply with 21 CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated 2007-06-24.
Laser Safety
Laser class 1M label
Figure 1
Class 1M Safety Label
A sheet of laser safety labels is included. In order to meet the
requirements of IEC 60825-1 we recommend that you stick the
laser safety labels, in your language, onto a suitable location on
the outside of the instrument where they are clearly visible to
anyone using the instrument
Laser wavelength range
Laser Type
Laser Class according to IEC 60825-1
Maximum CW output power of LCA
Maximum permissable CW output
power
Numerical aperture
Beam waist diameter
a CW output power is defined as the highest possible optical output power that the laser source
can produce at the output connector
Keysight N4373D Lightwave Component Analyzer, User's Guide
N4373D
#100, #102
#101, #102
1310 ± 10 nm
1550 ±20 nm
DFB
DFB
1M
1M
a
< 15 mW
< 15 mW
52 mW
163 mW
0.1
0.1
< 10 mm
< 10 mm
Advertisement
Table of Contents
