Keysight N4373D Lightwave Component Analyzer, User's Guide
Position the test head (upside down) on the bottom of
5
the network analyzer, with the front panels flush.
At the bracket adapters on
6
the test head, use the
0515-0433 screws (and a Torx
T20 screwdriver) to mount
the N4373-25280 and
N4373-25281 rear brackets on
both the left and right.
At the rear of the network
7
analyzer, use the Torx T20
screwdriver and the screws
from
Step 2
to attach the rear
brackets on both the left and
right.
At the rear of the rear
8
brackets, on the left and right,
use a Pozidrive size 2
screwdriver to mount the
0403-1166 adjustable feet .
9
Use the 13mm wrench to
adjust the height of the
adjustable feet to be level
with the bottoms of the feet
on the test head.
Getting Started
27