Table of Contents
Advertisement
Keysight N4373D Lightwave Component Analyzer, User's Guide
8
Function keys
9
Network analyzer
Port 1
10
Network analyzer
Port 3
Used to control the Lightwave
Component Analyzer.
Press the [Macro/Local] Utility
button on the network analyzer to
display the LCA function keys.
•
: Setup an LCA
Measurement
•
: Perform a single sweep
measurement with the current
measurement setup
•
: Perform continuous
sweep measurements with the
current measurement setup
•
: Start the optical power
meter
•
: Start the LCA server (if
not already running)
This is an S parameter
measurement port of the network
analyzer.
Depending on the S parameters of
the measurement this can be
either an RF input or an RF
output.
This is an S parameter
measurement port of the network
analyzer.
Depending on the S parameters of
the measurement this can be
either an RF input or an RF
output.
Introduction
21
Advertisement
Table of Contents
