Table of Contents
Advertisement
Getting Started
N O T E
N O T E
C A U T I O N
30
Using the same
c
torque wrench,
replace the
rigid cables on
the connectors
vertically.
Before you move the system or return it to a service center, make sure you
• replace the rigid cables back into the horizontal position and
• reattach the cable guard.
3. Remove the dust
cover from Port B
on the optical test
set.
4. Select the female
to female adapter
(part number
85058-60121) for
Port B.
For information on handling, gaging or cleaning RF connectors, please
refer to the "User's and Service Guide Keysight Technologies N4697E/F
1.85 mm Flexible Cables for Test Ports", available on the Keysight website.
For further information on the Adapter, please refer to the "User's and
Service Guide Keysight Technologies 85130H Rugged 1.85 mm to 1.85
mm Adapter Kit"
Do not turn the female to female adapter.
Turning the adapter can damage the electrical interface of the
adapter and the connector on the optical test set.
Always turn the nut to which you are attaching it.
Keysight N4373D Lightwave Component Analyzer, User's Guide
Advertisement
Table of Contents
