Keysight Technologies N4373D User Manual page 41

N O T E
Keysight N4373D Lightwave Component Analyzer, User's Guide
3 Calibrate the network analyzer electrically.
a Make sure the LCA as been returned to the electrical
measurement mode as described in "Returning to
Electrical Measurements" on page 100.
To meet the technical specifications, you must use the electronic
calibration module.
b Proceed with the electrical calibration as described in
"Electrical calibration for single-ended measurements" on
page 85.
We recommend you use "Electronic Calibration Modules" for
calibrating the Network Analyzer. For more information on
handling using and maintaining "Electronic Calibration
Modules", please refer to the "Reference Guide Keysight
Technologies Electronic Calibration Modules", available on
the Keysight website.
Performance Quick Check
39