Table of Contents
Advertisement
C A U T I O N
C A U T I O N
N O T E
Keysight N4373D Lightwave Component Analyzer, User's Guide
The contact connector on the optical test set is angled. If you are
using a patchcord with straight (red) and angled (green)
connectors, make sure you connect the angled connector to the
optical test set.
Connecting to the optical test set with a straight connector will
damage it.
Before you connect any fiber-optic cable to the Lightwave
Component Analyzer, please ensure it has been properly cleaned.
Fiber-optic connectors are easily damaged when connected to
dirty or damaged cables and accessories. When you use improper
cleaning and handling techniques, you risk expensive instrument
repairs, damaged cables, and compromised measurements.
15.On the rear, using the USB
cable supplied, connect the
network analyzer to the
optical test set.
16.Connect the power cables.
17.Continue with "Performance
Quick Check" on page 37 or
"Starting the Lightwave
Component Analyzer" on
page 84.
We recommend you back up your LCA data regularly.
Please refer to "Backing Up your LCA Data" on page 130 for information
on the files to save.
Getting Started
33
Advertisement
Table of Contents
