Writing Additional Pattern Data To An Sd Card - Brother KE-430F Service Manual

7. USING SD CARDS

7-5. Writing additional pattern data to an SD card

1
2
For example,
number 200
3
4
Ending read/write mode
5
46
writing pattern
While writing
Pattern number being written
appears in the tension display
TEST indicator switches off
Select the " w2" SD data read/write mode.
(Refer to "7-3. Preparation for reading and writing data".)
・ The numbers for the additional pattern data in the
sewing machine memory will appear in the tension
display.
(The initial value displayed is "ALL".)
2901B
Press the
additional pattern that you would like to write (ALL, 200
to 999).
・ When "ALL" is displayed, all of the additional pattern
data will be read at once.
・ The additional pattern numbers displayed will only be
those that are in the sewing machine memory. (If
there is no data in the memory, "ALL" will be the only
thing displayed.)
2656B
Press the ENTER key.
・ The buzzer will sound and the selected pattern data
will be written to the SD card.
・ If no additional pattern data exists, an error buzzer will
sound.
2660B 2658B
When the display returns to the status in step 1, writing
of the additional pattern data is complete.
・ If you would like to use any other read/write modes,
press the
run it.
2659B
Press the TEST key.
2404B
KE-430F, BE-438F
or key to select the number for the
or key to select the mode and then
2414B