Brother KE-430F Service Manual page 52

6. X AND Y PARALLEL MOVEMENT OF SEWING PATTERNS
6
X-scale
Parallel movement mode
7
Confirm the movement amount
8
Ending parallel movement mode
9
NOTE:
・ If you change the program number, the pattern number, the X-scale or the Y-scale, the movement amount which has
been stored will be reset.
・ When the power switch is turned off, the movement amount which has been stored will be reset. However, if memory
switch No. 465 is set to "2", the movement amount will remain stored and will not be reset.
42
Y-scale
Parallel movement mode
For example, set to -0.05.
TEST indicator switches off
Press the SELECT key so that the Y-scale indicator
flashes.
* When the SELECT key is pressed, the X-SCALE
indicator and the Y-SCALE indicator will flash
alternately.
2649B
Each time the
clamp/button clamp will move by 0.05 mm.
・ In Y-scale parallel movement mode, the work
clamp/button clamp will move forward when the
key is pressed, and backward when the
pressed.
・ The range of movement is a maximum of -9.95 mm to
+9.95 mm. However, the sewing pattern cannot be
moved outside the sewing area.
2779B
Press the ENTER key.
・ The amount of parallel movement in the vertical
direction will be confirmed, and the menu display will
change to illuminated.
2414B
Press the TEST key.
・ The display will return to the normal display and the
sewing machine will change to home position standby.
* If you would like to return to step 4, press the SELECT
key instead of the TEST key.
KE-430F, BE-438F
or key is pressed, the work
2401B
key is