Brother KE-430F Service Manual page 130

11. ADJUSTMENT
6
2nd step
7
Repeat steps 5 and 6 to set the home position to the correct position.
8
9 End adjustment mode.
10
Turn off the power switch and install the top cover.
120
Depress the foot switch to the 2nd step (for a 2-pedal foot switch,
depress the start switch) to provisionally confirm the offset value.
・
Work clamp lift motor home position detection will be carried out
based on the currently-displayed offset value. Check the home
position.
・
"JoG" will disappear from the TENSION display.
TEST indicator switches off
KE-430F, BE-438F
Press the ENTER key to confirm the offset value.
・
The offset value will illuminate in the menu display.
* If the offset value has not been provisionally confirmed
(if "JoG" is illuminated), the invalid buzzer will sound.
Press the TEST key.
・ The display will return to the normal display and the
sewing machine will switch to home position detection
standby.
4441B
2414B
2404B