Deleting Tension Codes - Brother KE-430F Service Manual

5. EDITING PATTERN DATA

5-8. Deleting tension codes

<Deleting section 2>
1
2
3
For example, when an
individual section is selected
Tension code T6
4
or
40
Final stitch
For example, when all
sections are selected
2414B 2634B
KE-430F, BE-438F
Carry out steps 1 to 3 in "5-3. Switching to pattern editing
mode" to switch to pattern editing mode.
While pressing the SELECT key, press the SECTION
[+ -] keys. Each time a key is pressed, the work
clamp/button clamp automatically moves to the start of
the next or the previous section.
Move the work clamp/button clamp to the start of the
section you would like to delete.
While pressing a TENSION key, press the RESET key.
The delete selection display will appear.
・ The TEST indicator will turn off.
・ " dEL" will be displayed in the menu display.
When you press the SECTION [+ -] keys, the delete
selection display will switch between all sections and an
individual section.
To delete the section, press the ENTER key.
・ The specified tension code will be deleted and the sewing
machine will return to pattern editing mode. As well as
this, the section will also be deleted and the numbers
for subsequent sections will be decremented by 1.
* The tension code in section 1 is the only tension code
which cannot be deleted.
If you would like to return to pattern editing mode without
deleting the tension code, press the RESET key.
Final stitch
2647B
2630B 2641B
2643B 2644B
2645B 2646B