Work Clamp Arm Mechanism (Be-438F) - Brother KE-430F Service Manual
Electronic direct drive lockstitch bar tacker / electronic direct drive lockstitch button sewer
Hide thumbs
Also See for KE-430F:
- Instruction manual (90 pages) ,
- Manual de instrucciones (90 pages) ,
- Parts manual (68 pages)
Table of Contents
Advertisement
10-15. Work clamp arm mechanism (BE-438F)
1. Feed plate
2. Screws [2 pcs]
3. Button clamp holder
4. Button clamp holder shaft
5. Set screws [2 pcs]
6. Nuts [2 pcs]
Adjusting screw
Compression spring
After installing, check that the needle passes into the button hole without touching the button. (Refer to "11-13.
Adjusting the position of the button clamp (BE-438F)".)
Apply grease to the portions indicated by the arrows during assembly.
KE-430F, BE-438F
10. ASSEMBLY
2888B
2889B
101
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
