Item No.
Item name
[ 55]
[CL−r]
[ 56]
[CL−L]
[ 57]
[Foot]
[ 58]
[FLiP]
[ 59]
[CooL]
[ 60]
[7SEG]
[ 61]
[ CUt]
[ 62]
[dtEn]
[ 63]
[ WiP]
[ 64]
[oP 1]
[ 65]
[oP 2]
[ 66]
[oP 3]
[ 67]
[oP 4]
[ 68]
[oP 5]
[ 69]
[oP 6]
[ 70]
[oP 7]
[ 71]
[oP 8]
[ 72]
[oP 9]
[ 73]
[oP10]
[ 74]
[oP11]
[ 75]
[oP17]
[ 76]
[oP18]
[ 77]
[oP19]
[ 78]
[oP20]
* Cannot be used with the KE-430F and BE-438F.
The valve for the right work clamp turns on. (*)
The valve for the left work clamp turns on. (*)
The valve for the stepping foot turns on. (*)
Inner clamping valve is turned ON (*)
Needle cooler valve is turned ON. (*)
Panel indicators illuminate in sequence, and then the 7-segment display turns on one
digit at a time.
Blank
0
1
2 . . . .
Thread trimmer solenoid is turned ON for the specified period.
Remove the rear cover and check the operation.
The digital tension solenoid is turned ON for the specified period.
The external wiper solenoid is turned ON for the specified period. (*)
Option output 1 turns on. (*)
Option output 2 turns on. (*)
Option output 3 turns on. (*)
Option output 4 turns on.
Option output 5 turns on.
Option output 6 turns on.
Option output 7 turns on.
Option output 8 turns on.
Option output 9 turns on.
Option output 10 turns on.
Option output 11 turns on.
Option output 17 turns on.
Option output 18 turns on.
Option output 19 turns on.
Option output 20 turns on.
KE-430F, BE-438F
Operation
8
9
8.
Blank
4. FUNCTION SETTINGS
29