Disassembly; Covers - Brother KE-430F Service Manual

9. DISASSEMBLY

Disassembly should only be carried out by a
qualified technician.
Turn off the power switch before disassembly,
otherwise the machine may operate if the foot switch
is depressed by mistake, which may result in injury.
Be sure to wear protective goggles and gloves when
handling the lubricating oil and grease, so that they
do not get into your eyes or onto your skin,
otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease
under any circumstances, as they can cause
vomiting and diarrhea.
Keep the oil out of the reach of children.
Disassemble each part in order of the numbers.
.
9-1

Covers

CAUTION
When
accessories, be sure to use only genuine Brother
parts.
Brother will not be held responsible for any
accidents or problems resulting from the use of
non-genuine parts.
If any safety devices have been removed, be
absolutely sure to re-install them to their original
positions and check that they operate correctly
before using the machine
To prevent accidents and problems, do not modify
the machine yourself.
Brother will not be held responsible for any
accidents or problems resulting from modifications
made to the machine.
1. Screws [4 pcs]
2. Top cover
3. Screws [4 pcs]
4. Rear cover
5. Screws [4 pcs]
6. Side cover
KE-430F, BE-438F
replacing parts and installing
.
7. Bolts [2 pcs]
8. Eye guard assembly
9. Screws [3 pcs]
10. Face plate assembly
11. Shoulder screws 8-2 [2 pcs]
12. Washer, wave springs [2 pcs]
13. Shuttle race cover assembly
9. DISASSEMBLY
optional
2533B
61