3-12. Writing error log data to CF card
1
2
3
End data read/write mode
3-13. Reading sewing data from floppy disks
1
Insert the floppy disk into the floppy disk drive.
2
3
Writing
TEST indicator switches off
Press the R/W key.
• [-Fdd] will change to [ ALL].
Press the
* Program numbers that contain no data will also be displayed at this
time.
* If [ ALL] is selected, all sewing data will be read at once.
BAS-311G, BAS-326G
Select the [w 8] data read/write mode.
Press the R/W key.
• The buzzer will sound and the error log data will be
copied from the internal memory onto the CF card.
Press the TEST key.
Turn off the power switch, remove the CF card, and then
close the cover of the CF slot.
Select the [r 9] data read/write mode.
or
key to select the program number to be read.
3. READING / WRITING DATA
5061Q
4579Q
5062Q
4577Q
31