Specifications - Brother KE-430F Service Manual

1. SPECIFICATIONS

Stitch formation
Maximum sewing speed
Pattern size (X x Y)
Dimensions of buttons
that can be sewn
Feed mechanism
Stitch length
Number of stitches
Maximum stitch number
Work clamp lifter
Work clamp height
Button clamp height
Starting method
Hook
Digital tension set
Thread wiper device
Thread trimmer device
Thread nipper device
Data storage method
Data recording media
Number of cycle programs
Number of stored data
Motor
Weights
Power source
*1 Use the optional button clamp B (S03634-101) for diameters of 20 mm or greater.
*2 No guarantees of operation can be given for any media. Use one with a capacity of 2GB or less.
*3 The number of sewing patterns and the number of stitches that can be recorded will vary depending on the number of
stitches in each sewing pattern.
KE-430F
Electronic direct drive lockstitch bar tacker
3,200 sti/min
40 x 30 mm max.
Y-θ intermittent feed mechanism (pulse-motor driven mechanism)
0.05 - 12.7 mm
Refer to "List of Sewing Patterns" on the CD instruction manual for the number of stitches
in sewing patterns which have already been entered.
17 mm max.
Foot switch or 2-pedal foot switch (option)
Shuttle hook (shuttle hook 2, optional)
-03, -0K, -0F specifications:
Standard equipment ;
-05 specifications: Option
Flash memory (Any sewing pattern can be added using SD card)
Up to 30 can be registered (up to 50 steps each)
89 sewing patterns are set already
(Up to a maximum of 512 additional types of sewing patterns. Total number of stitches of
stored data which can be added is within 500,000.) (*3)
Machine head: approx. 57 kg, Operation panel: approx. 0.4 kg
Single-phase 110V / 220V / 230V, 3-phase 220V / 380V / 400V
KE-430F, BE-438F
Electronic direct drive lockstitch button sewer
Single needle lock stitch
Outer diameter of button 8 - 30 mm (*1)
Approx. 5,000 stitches (1 pattern)
Pulse-motor driven mechanism
Standard equipment
Standard equipment
Standard equipment
SD card (*2)
64 sewing patterns are set already
AC servo motor 550 W
Control box: approx. 9 kg
1. SPECIFICATIONS
2452B
2278B
BE-438F
2,700 sti/min
6.4 x 6.4 mm max.
0.05 – 6.4 mm
13 mm max.
Shuttle hook
Option
400VA
1