Thread Take-Up Spring - Brother KE-430F Service Manual

11-1-2. Thread take-up spring

Use
Thread take-up spring
height (mm)
Thread take-up spring
tension (N)
Lower
<Thread take-up spring tension>
Adjust by turning the shaft (2) with a screwdriver.
NOTE:
When the spring height (stroke) is great or the spring tension is insufficient, it may cause the thread end length to vary after
thread trimming.
Medium-weight Knitted wear
materials (-03) (-0K)
0.2 - 0.4
Higher
KE-430F, BE-438F
KE-430F
Foundation
garments (-0F)
6 - 11
<Thread take-up spring height>
Loosen the set screw (1) and turn the tensioner body to
adjust the thread take-up spring height.
2320B
11. ADJUSTMENT
BE-438F
Heavy-weight
materials (-05)
0.6 - 1.0 0.15 – 0.35
Stronger
Weaker
6 - 11
2321B
105