Work Clamp Arm Mechanism - Brother KE-430B Service Manual

３-２. Work clamp arm mechanism (KE-430B, 430C, 431B, 431C)
1. Set screw
2. Needle
3. Needle bar thread guide
4. Bolts [2 pcs]
5. Work clamp arm assy
6. Work clamp felt
7. Screws [2 pcs]
8. Feed plate
Be careful not to drop these two bearing balls
when removing the feed bracket assembly.
9. Rubber cap
10. Set screw [Loosen]
11. Tack width feed shaft
12. Rod end
13. Screws [8 pcs]
14. Feed bracket guide plate
15. Feed bracket assy
16. Flat screws [2 pcs]
17. Screws [2 pcs]
18. Needle plate
Be careful not to drop these three bearing balls
when removing the work clamp arm assembly.
KE-430B, 430C series
3. DISASSEMBLY
Remove the feed bracket guide
plate and the feed
assembly together as a single unit.
3271Q
bracket
3272Q
24