Back Panel Guide - Lyngdorf Audio TDAI-1120 Owner's Manual

Back panel guide

1. A1/PHONO MM: Connects directly to turntables/gramophones with high output cartridges (MM: Moving
Magnet). The ground cable from the turntable/gramophone connects to the finger screw.
2. A2/ANALOG IN: Connects to tape recorders and other analog sources.
3. OUT: Analog connection to subwoofer(s), tape recorders, external amplifiers or headphone amplifier.
4. MICROPHONE: Connects to the microphone and microphone cable for RoomPerfect™ calibration.
5. D1-D2 COAXIAL DIGITAL INPUTS: Connects to CD players and other digital sources.
6. D3-D4 OPTICAL DIGITAL INPUTS: Connects to CD players and other digital sources.
7. USB: Connects to your FAT32 formatted USB storage (Pen Drive or Network Attached Storage, NAS).
This connector can also power the external storage drive or other devices.
8. TV: (No video output) Connects to your television's HDMI ARC connector for playing TV sound.
9. TRIGGER IN/OUT: These connectors allow you to have the TDAI-1120 activated by another product – or
to have the TDAI-1120 activate other products, when turned on and off.
10. MAINS POWER: Always use a mains cable that fits your mains power outlet with ground connection.
The TDAI-1120 will automatically adjust to the mains power available.
Lyngdorf Audio TDAI-1120 – Owner's manual
5