24
Device Description
Table 8: Legend for Figure "Display Elements"
LED
H
1)
With high baud rates, the pulses are so short that the on state cannot or can hardly be detected
with the naked eye.
2)
XON/XOFF data flow control active
3)
Defective characters are not transmitted by the I/O module to the fieldbus coupler/controller.
4)
RTS/CTS data flow control active
5)
Firmware version 03 or higher
3.4
Operating Elements
The I/O module 750-652 has no operating elements.
3.5
Schematic Diagram
Figure 6: Schematic Diagram
Designation
Status
OFF
5)
DMX
Green
750-652 Serial Interface RS-232 / RS-485
Function
DMX is OFF
DMX is ON
WAGO-I/O-SYSTEM 750
Manual
Version 1.4.0