750-511/000-001 [2Do 24V Dc 0,1A/Frequency/2Khz]; View; Description - WAGO 750 Series Manual

2.1.3 750-511/000-001 [2DO 24V DC 0,1A/Frequency/2kHz]

2-Channel Pulse Width Output Module DC 24 V
2.1.3.1

View

Function
Fig. 2.1.3-1: 2-Channel Pulse Width Output Module 750-511/000-001
2.1.3.2

Description

The pulse width output module 750-511/000-001 generates a pulse-width-
modulated 24 V output signal with a variable frequency from 2 Hz to 2 kHz.
The frequency is given by a 10 Bit value with a resolution of 2 Hz per digit.
The On/Off ratio is preset by 50%.
The module enables the wiring of a load with pulse and directional signal. The
pulse signal and the directional signal are each displayed via one output
channel. The direct wiring of loads with ground (earth) is possible to the
connections DO 1 (pulse signal) and DO 2 (directional signal), the 0 V ground
potential and ground (earth), if necessary.
The outputs are short-circuit-protected.
The operational readiness and the trouble-free internal data bus
communication of the channels are indicated via a green function LED.
An optocoupler is used for electrical isolation between the bus and the field
side.
WAGO-I/O-SYSTEM 750
I/O Modules
750-511/000-001 [2DO 24V DC 0,1A/Frequency/2kHz]
13 14
A
DO 1
C
B
D
13 14
DO 1
+ +
- -
750-511
/000-001
Function
DO 2
Data contacts
DO 2
24V
0V
Power jumper contacts
• 19
View
g051103e