Technical Data - WAGO 750 Series Manual

22 • 750-511/000-001 [2DO 24V DC 0,1A/Frequency/2kHz]

Technical Data

2.1.3.5 Technical Data
Module Specific Data
Number of outputs
Current consumption (internal)
Voltage via power jumper contacts
Type of load
Output current
Pulse frequency
Pulse duty factor
Resolution
Isolation
Current supply
Internal bit width
Dimensions (mm) W x H x L
Weight
Standards and Regulations (cf. Chapter 2.2 of the Coupler/Controller Manual)
EMC-Immunity to interference (CE) acc. to EN 50082-2 (96)
EMC-Emission of interference (CE) acc. to EN 50081-1 (93)
Approvals (cf. Chapter 2.2 of the Coupler/Controller Manual)
More Information
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM
ELECTRONICC Tools and Docs (Item-No.: 0888-0412)
or in the internet under:
www.wago.com
System Description
2 (1 x pulse signal, 1 x directional signal)
65 mA
DC 24 V (-15 % ... +20 %)
resistive, inductive
0.1 A short-circuit-protected
2 Hz ... 2 kHz
50 %
2 Hz
500 V (System/Supply)
(field side) 6 mA
typ.
2 x 16 bits data
2 x 8 bits control /status
12 x 64* x 100
* from upper edge of 35 DIN rail
ca. 55 g
UL (UL508)
C US
UL (UL1604)
C US
KEMA
Conformity Marking
! Documentation ! WAGO-I/O-SYSTEM 750 !
Class I Div2 ABCD T4A
II 3 G EEx nA II T4
WAGO-I/O-SYSTEM 750
I/O Modules