Process Image; Configurable I/O Module 750-469/040-000 - WAGO 750-469/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-469/040-000 2AI Thermocouple configurable /XTR

Process Image

4
Mapping of process data in the process image of fieldbus systems
The representation of the I/O modules' process data in the process image
depends on the fieldbus coupler/controller used. Please take this information as
well as the particular design of the respective control/status bytes from the
section "Fieldbus Specific Design of the Process Data" included in the description
concerning the process image of the fieldbus coupler/controller used.
4.1

Configurable I/O Module 750-469/040-000

The operating mode of I/O module 750-469/040-000 can be configured using the
WAGO-I/O-CHECK commissioning tool. The default setting is Thermocouple
Type K.
The parameterization dialog in WAGO-I/O-CHECK provides the following
selection boxes for possible I/O module settings:
Process Image 33
Manual
Version 1.3.0