Preheating Screen; Tools Screen - Flashforge Guider 3 User Manual

The temperature of the extruder and platform can be set in advance as required on the

preheating screen.

Extruder
220℃
Heat
Calibration
Home
[Home]
Here you can make each axis of the equipment return to the zero position.
[Move] Here you can manually move the X, Y, Z-axis of the equipment.
[Network]
Here you can connect to the wireless network, wired network and hot spot.
[Cloud]
Here you can connect to the FlashCloud or Polar Cloud.
[Camera] Here you can turn on the camera and view the time-lapse video.
[About]
Here displays the basic information about the equipment.
[Status]
Here displays the running status of the equipment.
[Maintain] Here lists some maintenance items for users to check if users encounter
any problems.
[Upgrade]
Here is for firmware upgrade. Users can upgrade to the latest firmware of
the equipment when connecting to wireless network.
5.3 Preheating Screen
Platform
45℃
Heat

5.4 Tools Screen

Move Network Cloud
1/2
Extruder
45℃/220℃
Cancel
[Calibration]
Z-Axis Calibration, Sensor Calibration,
Assist Calibration[complete mode,
simplified mode].
17
Platform
45℃
Heat