Preheating Screen; Tools Screen - Flashforge Guider 3 Plus User Manual

The temperature of the extruder and platform can be set in advance as required on the

preheating screen.

Extruder
220℃
Heating
Level and
Calibration
[Level and Calibration] Auto Level, Z Calibration
[Home] Here you can make each axis of the equipment return to the zero position.
[Manual] Here you can manually move the X, Y, Z-axis of the equipment.
[Internet]
Here you can connect to the wireless network, wired network and hot spot.
[Cloud]
Here you can connect to the FlashCloud or Polar Cloud.
[Camera] Here you can turn on the camera and view the real-time video.
[About]
Here displays the basic information about the equipment.
[Status]
Here displays the running status of the equipment.
[Maintenance] Here lists some maintenance items for users to check if users encounter
any problems.
[Upgrade]
Here is for the firmware upgrade. Users can upgrade to the latest firmware
of the equipment when connecting to wireless network.
5.3 Preheating Screen
Platform
45℃
Heating

5.4 Tools Screen

Home
Camera About
Extruder
45℃/220℃
Manual Internet
Status Maintenance
17
Platform
45℃
Cancel Heating
Cloud
Upgrade