Printing Over Usb; Usb Connection; Create A Gcode - Flashforge FINDER Start Up And Instruction Manual

————————————————————————————————————————————

Printing over USB

USB connection

Connect your Finder with your PC or laptop via USB cable.
Turn on your Finder and start FlashPrint.
Click [Print]--[Connect Machine], then select USB in the [Connection Mode] option and select
"FlashForge Finder" in [Select Machine] option. Finally click [Connect] button to connect to the
printer. Note: The machine icon on the bottom right displays the connection status.
means Connected and means Disconnected

Create a Gcode

The steps of how to generate a Gcode file:
1. Double-click the icon of FlashPrint to start the software.
2. Click [Print]--[Machine Type] to select FlashForge Finder
17