C
3
HAPTER
INSTALL FITTINGS IN THE STEERING VALVE
Before mounting the steering valve (P/N 334-0003-094) on the machine, install the proper fittings in the valve.
This prepares the valve for installation and simplifies the hose connection process later in the procedure.
FIGURE 1. Fittings Installed in the Steering Valve
Port B
Fitting - -6 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -4 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -6 ORFS (M) to -8 SAE O-Ring (M) Straight Adapter
Fitting - -6 ORFS (M) to -10 SAE O-Ring (M) Straight Adapter
Transducer - 0-3000 PSI Pressure
14
Miller Nitro 5000 Series & New Holland Guardian F Series RS1™ HDU Guidance and Steering Installation Manual
The appearance of the steering hydraulic valve
may vary slightly from the images contained in
this manual. However, the fittings, hose
connections, and cable connections remain the
same.
Fitting
NOTICE
Part Number
333-0012-084
333-0012-195
333-0012-199
333-0012-233
422-0000-086
Port A
Port
LS STEER
LSPV
P, T
A, B
PS