LifeSpan R5i Owner's Manual page 28

Step 10: Pedal Assembly
A. Identify which
pedal goes on
the right side
and which goes
on the left side
by locating the
"R" on the top
of the Right
Pedal (13) and
the "L" on the
top of the Left
Pedal (12)
B. Hand tighten
the Right Pedal
(13) into the
Right Crank Arm
(R) by turning
clockwise
C. Tighten both
pedals with the
provided 15mm
Wrench (31).
Step 11: Setting Date and Time
To set the date and time in your console follow these steps:
1. Press any of the quick resistance buttons to initiate the date and time set
up mode. The console will read Update Calendar.
2. Press and hold any of the quick resistance buttons for 5 seconds.
3. Press the ▲ /▼ buttons to set the correct YEAR. Press ENTER.
4. Press the ▲ /▼ buttons to select the correct MONTH. Press ENTER.
5. Press the ▲ /▼ buttons to set the correct DAY. Press ENTER.
6. Press the ▲ /▼ buttons to set the correct HOUR. Press ENTER.
7. Press the ▲ /▼ buttons to set the correct MINUTES. Press ENTER.
Assembling Your R5i Recumbent Bike
12
Q
13
R
29