Step 3: Front Support Assembly
A.
Move the Seat (9) forward so it is located in the position as shown
below.
B.
Align the Front Support Assembly (2) with the Front Bracket (A).
C.
Install two M8x75L Bolts (15) and Curve Washers (16) through the Front
Support Assembly (2) and into the Front Bracket (A). Tighten these bolts
prior to starting step D.
D.
Insert two M8x16L Bolts (19) through the top of the Front Bracket (A)
and into the Front Support Assembly (2).
2
15
19
A
16
Assembling Your R5i Recumbent Bike
1
9
21