Related Manuals for LifeSpan S1 Sport Series
Summary of Contents for LifeSpan S1 Sport Series
- Page 1 Indoor Bike Owner’s Manual For safe use and product knowledge, please completely read this Product OWNERS MANUAL. v. 1.2...
-
Page 3: Welcome To Lifespan
Welcome to LifeSpan S1/S2 ext. 4 Web site: www.LifeSpanFitness.com... -
Page 4: Table Of Contents
Table of Contents Welcome to Lifespan Limited Home Use Warranty Important Safety Precautions S1 Contents S1 Assembly Instructions S1 Assembly Instructions Continued S2 Contents S2 Assembly Instructions S2 Assembly Instructions Continued S1/S2 Adjustments S1 Exploded View S2 Exploded View Extended Warranty... -
Page 5: Specifications
Specifications 48” Max. Length 48” Max. Length 47” Max. Height 45” Max. Height 18” Wide 21.5” Wide 84 lbs. 97 lbs. 31 lbs. 40 lbs. Seat Height Seat Height Handlebar Height Handlebar Height Seat Fore/Aft Seat Fore/Aft Alloy with sealed bearings Alloy with sealed bearings PVC Dipped PVC Dipped... -
Page 6: Limited Home Use Warranty
Limited Home Use Warranty The LifeSpan Sport S1/S2 Indoor Bike(s) come with the following limited warranty, which applies only to the use of the Indoor Bike in the home, for residential, non-commercial purposes: Frame: 5 years 5 years Parts: 90 days... -
Page 7: Important Safety Precautions
Important Safety Precautions Keep children off your indoor bike at all times. -
Page 8: S1 Contents
S1 Contents #18 Screw x 4 #2 Seat Bracket Plastic... -
Page 9: S1 Assembly Instructions
S1 Assembly Instructions Remove plastic block attached to frame for protection during shipping. Remove bolts (18) and washers (19) from the rear base. Stand the main frame assembly upright with the rear base (9) positioned underneath the frame. Insert two bolts (18) with washers (19) down through the holes in the frame and into the rear base. -
Page 10: S1 Assembly Instructions Continued
S1 Assembly Instructions Contiuned Round Adjustment Knob Instructions Turn knob clockwise to tighten Insert handlebar post (6) into the frame, with holes facing out toward knob. Adjust height and tighten knob (7). (follow round adjustment knob instructions above) Loosen the knob (5) on the front of the frame and slide the seat bracket (2) into the frame. -
Page 11: S2 Contents
S2 Contents... -
Page 12: S2 Assembly Instructions
S2 Assembly Instructions Place a washer (55) and cap nut (56) over each bolt and with the multifunction wrench secure the rear base in place. Place a washer (55) and cap nut (56) over each bolt and with the multifuntion wrench secure the front base in place. -
Page 13: S2 Assembly Instructions Continued
S2 Assembly Instructions Contiuned Round Adjustment Knob Instructions Turn knob clockwise to tighten Insert handlebar post (16) into the frame with holes facing out toward knob. Adjust height and tighten knob (15). (follow round adjustment knob instuctions above) Loosen the knob (15) on the botton of the seat bracket (17). (follow round adjustment knob instructions above) Slide seat post (63) into the seat bracket (17) from the front of the bracket as illustrated. -
Page 14: S1/S2 Adjustments
S1/S2 Adjustments Where to Place your Indoor Bike Place Adjust the foot down until it touches the floor. Repeat if necessary until the bike is completely stable. The straps should be tight enough to keep the ball of your foot on the pedals throughout the complete pedal rotation. -
Page 15: S1 Exploded View
S1 Exploded View... -
Page 16: S2 Exploded View
S2 Exploded View... -
Page 20: Serial Number Information
- S1/S2 TREADMILL MODEL NUMBER SERIAL NUMBER : MADE IN TAIWAN...
Need help?
Do you have a question about the S1 Sport Series and is the answer not in the manual?
Questions and answers